Every crown that leaves JU Genesis Lab passes the same mandatory inspection before it is packed. This checklist is not a formality — it is our last line of defense against a remake, an extra adjustment visit, and a disappointed dentist.
1. Fit
After glazing, residue from the glazing liquid or the firing stand can remain inside the crown. Our technicians sand the affected areas, blow them out with air, and inspect the crown once more before it is delivered.
2. Proximal Contact
Where needed, we slightly relieve the gum material on the secondary model. When the proximal contacts are checked on that model, the crown margin must stay fully seated — it should never lift or open.
- The crown is removed from the working model to confirm that the fit is correct.
- The proximal contacts are checked on the secondary model to make sure they are not too tight.
- If there is any interference around the gum area, the crown is adjusted in that specific area.

3. Bite
The bite is adjusted and confirmed before delivery. The posterior portion of a crown is sometimes slightly lifted, so this area receives particular attention.
4. Shade
- Whenever an old crown is available, it is used as the reference for shade comparison.
- The shade is checked for even distribution, without concentrated or blotchy areas.
- On mandibular teeth, the occlusal surface shade must also match the body shade of the tooth.
5. Margin
Before glazing, the margin is trimmed and refined with a blue rubber wheel so that it is never too thick.
6. Implant
- On the working model, the pink gum tissue is removed so the abutment can be verified as fully and correctly seated.
- The screw is checked to confirm that it can be inserted and removed without resistance.
- The crown type is confirmed in advance: cement-retained or screw-retained.
Redo and Repair Cases
For every redo or repair case, the cause of the original problem is identified before a new crown is started.
When the old crown is available, it is inspected closely to determine what went wrong — and to make sure the same issue does not happen again.